प्रीकास्ट निर्माण प्रौद्योगिकी

प्रीकास्ट निर्माण प्रौद्योगिकी

परियोजना का नाम : गाचीबोवली, हैदराबाद में एसबीआई डेटा सेंटर के लिए प्रीकास्ट टेक्नोलॉजी के साथ जी+3 मंजिला मल्टी लेवल कार पार्किंग ब्लॉक का डिजाइन और निर्माण, हैदराबाद सेंट्रल यूनिवर्सिटी (एचसीयू), गाचीबोवली, हैदराबाद के सामने।

1. परिसर कार्यात्मक परिसर है। और इसके आसपास सभी इमारतों पर कब्जा है और उनका उपयोग किया जा रहा है। विशेष रूप से एसबीआई का डेटा सेंटर जो कार पार्किंग के बगल में काम कर रहा है, उसे बाहरी धूल से मुक्त किया जाना है। 2. साइट पर हरित कंक्रीट बनाने के लिए सामग्री और मशीनरी को रखने के लिए कोई खाली जगह उपलब्ध नहीं थी। 3. साइट पर प्रदूषण के स्तर को नियंत्रित/न्यूनतम किया जा सकता है। 4. साइट पर पानी का न्यूनतम/इष्टतम उपयोग। 5. चूंकि तत्वों का निर्माण/कास्ट नियंत्रण की स्थिति में किया जाता है, इसलिए कंक्रीट की मात्रा बेहतर होती है। 6. निर्माण से पहले तत्वों का भौतिक परीक्षण किया जाता है।

img

1550.00 लाख

परियोजना का बजट

img

30 मई 2017

आरंभ करने की तिथि

img

30 मई 2018

पूरा करने की तिथि

img

प्रीकास्ट

जगह

परियोजना टीम / हमसे संपर्क करें

क्रमांक नाम (श्री / श्रीमती) पद कार्यालय का पता कार्यालय नंबर मोबाइल नंबर ईमेल आईडी
1 श्री. एन.एन.एस.एस.राव मुख्य अभियन्ता दक्षिण क्षेत्र-II प्रथम तल, निर्माण भवन, सुल्तान बाजार, कोटि, हैदराबाद-500095 04024619327 9445275775 cesz22015@gmail.com
2 श्री. पी. कनक राजू अधीक्षण अभियंता एचसीसी-I, दूसरी मंजिल, निर्माण भवन, सुल्तान बाजार, कोटि, हैदराबाद-500095 04024656975 9442517679 hydsehcc1.cpwd@gmail.com
3 श्री. मनोज कुमार अधिशाषी अभियंता एचसीडी-II, पहली मंजिल, केन्द्रीय सदन, सुल्तान बाजार, कोटि, हैदराबाद-500095। 04024656036 9100940861 cpwd143970@yahoo.co.in

तकनीक

तकनीक
प्रीकास्ट निर्माण प्रौद्योगिकी

विवरण

प्रस्तावित भवन को नींव तक कास्ट-इन-सीटू के रूप में डिजाइन और निर्मित किया गया है और कॉलम, बीम, खोखले कोर स्लैब, रैंप, सीढ़ियां, बाहरी / आंतरिक दीवारें और लिफ्ट कोर दीवारें और अन्य प्रीकास्ट तत्व शामिल हैं। डिज़ाइन आवश्यकताओं के अनुसार।


प्रमुख लाभ

1. साइट पर प्रदूषण के स्तर को नियंत्रित/कम किया जा सकता है।

2. साइट पर पानी का न्यूनतम/इष्टतम उपयोग।

3. चूंकि तत्वों का निर्माण/कास्ट नियंत्रण की स्थिति में किया जाता है, इसलिए कंक्रीट की मात्रा बेहतर होती है।

4. परिसर कार्यात्मक परिसर है। और इसके आसपास सभी इमारतों पर कब्जा है और उनका उपयोग किया जा रहा है। विशेष रूप से कार पार्किंग के बगल में काम कर रहे एसबीआई के डेटा सेंटर को बाहरी धूल से मुक्त रखा जाना चाहिए।

5. साइट पर हरित कंक्रीट बनाने के लिए सामग्री और मशीनरी को रखने के लिए कोई खाली जगह उपलब्ध नहीं थी।


कार्यान्वयन रणनीति

क्रमांक विवरण इमेजिस
1

फैब्रिकेटिंग यार्ड निर्माण स्थल से लगभग 30 किलोमीटर की दूरी पर स्थित है। कुल 10 नग प्रीकास्ट / प्री-स्ट्रेस्ड तत्व तथा 150 मीटर / 180 वर्ग मीटर का 1 नग बेड खोखला कोर स्लैब। प्रति दिन कास्टिंग यार्ड में डाले जाते थे। प्रीकास्ट/प्री-स्ट्रेस्ड बीम का इलाज 3 दिनों के लिए भाप इलाज के साथ किया गया था और अन्य सदस्यों का इलाज कारखाने में 10 दिनों के लिए मैन्युअल इलाज विधि द्वारा किया गया था। सदस्यों/तत्वों को 28 दिनों की 75% शक्ति प्राप्त करने के बाद परिवहन किया जा सकता है, अर्थात, सदस्य को तीन दिनों के बाद भाप उपचार के साथ और 10 दिनों के बाद सामान्य जल उपचार के साथ परिवहन किया जा सकता है। फैब्रिकेटिंग यार्ड में एक इंजीनियर को तैनात करके संरचनात्मक ड्राइंग के अनुसार प्रीकास्ट/प्री-स्ट्रेस्ड सदस्यों की गुणवत्ता सुनिश्चित की गई। साइट पर सीमित स्थान उपलब्ध होने के कारण, विभिन्न प्रीकास्ट तत्वों को फैब्रिकेशन यार्ड से रात के समय ट्रेलरों में ले जाया गया और उन्हें अगले दिन दिन के समय खड़ा किया गया। हालाँकि, काम के लिए निर्धारित समय 6 महीने था, हालाँकि, वास्तुशिल्प और संरचनात्मक डिजाइन के संशोधन और ग्राहक द्वारा पेश किए गए परिवर्तनों के कारण, काम 12 महीनों में पूरा हो सका।

 

सीखे गए सबक / सीखें

क्रमांक विवरण इमेजिस
1

विभिन्न तत्वों के निर्माण, स्थापना के कार्यक्रम को शीघ्र पूरा करने के लिए पूर्व योजना बनाई जाएगी।

 

टेम्पलेट के प्रोसेसिंग के समय त्रुटि हुई है.
The following has evaluated to null or missing:
==> request.getParameter("param")  [in template "20096#20121#887434" at line 17, column 84]

----
Tip: If the failing expression is known to legally refer to something that's sometimes null or missing, either specify a default value like myOptionalVar!myDefault, or use <#if myOptionalVar??>when-present<#else>when-missing</#if>. (These only cover the last step of the expression; to cover the whole expression, use parenthesis: (myOptionalVar.foo)!myDefault, (myOptionalVar.foo)??
----

----
FTL stack trace ("~" means nesting-related):
	- Failed at: #assign param1 = request.getParameter...  [in template "20096#20121#887434" at line 17, column 66]
----
1<#assign Project_related_to =""/> 
2<#assign Project_related_to ="Project related to"/> 
3				<#if locale?contains("hi")> 
4				<#assign Project_related_to ="प्रोजेक्ट से सम्बंधित"/> 
5			</#if> 
6 
7<#assign Technology =""/> 
8<#assign Technology ="Technology"/> 
9				<#if locale?contains("hi")> 
10				<#assign Technology ="तकनीकी"/> 
11			</#if> 
12 
13<section class="w-100 clearfix cpwdOurUnitsSec" id="cpwdOurUnitsSec"> 
14         <div class="cpwdOurUnitsInner"> 
15            <div class="container-fluid container-space custom-container-xxl"> 
16               <div class="cpwdOurUnitsCarousel"> 
17								 <#assign param1 = request.getParameter("param")/>  
18                 	 <div class="cpwdHeadingCommon"> 
19                     <h2> ${Project_related_to} ${param1} ${Technology}</h2> 
20                  </div> 
21                  <div class="owl-carousel owl-theme ourUnitsOwlCarousel"> 
22										 
23 
24 
25     <#if entries?has_content> 
26   <#list entries as entry> 
27	 <#assign assetRenderer = entry.getAssetRenderer()/> 
28	 <#assign className = assetRenderer.getClassName()/> 
29	 <#assign entryTitle = htmlUtil.escape(assetRenderer.getTitle(locale))/> 
30	 <#assign viewURL= assetPublisherHelper.getAssetViewURL(renderRequest, renderResponse, entry,true)/>		  								 
31	 <#assign viewURL = assetRenderer.getURLViewInContext(renderRequest, renderResponse, viewURL)/> 
32	 <#assign fields = entry.getAssetRenderer().getDDMFormValuesReader().getDDMFormValues().getDDMFormFieldValues()/> 
33   <#if fields[1].getValue().getString(locale)== param1>		 
34			 
35			 
36<#assign docValJSON = fields[2].getValue().getString(locale) /> 
37<#assign imageUrl = jsonFactoryUtil.createJSONObject(docValJSON).getString("url") /> 
38<#if imageUrl?has_content> 
39 
40<#else> 
41<#assign imageUrl = "/documents/676924/679930/Tech080820181709230.jpg/abb94334-77e9-4623-a36f-f6abf59e52f8?t=1669112725720"/> 
42</#if> 
43 
44					 
45                <div class="item"> 
46									<#if entry.getAssetRenderer().hasEditPermission(themeDisplay.getPermissionChecker())> 
47        <#assign redirectURL = renderResponse.createRenderURL() /> 
48 
49        ${redirectURL.setParameter("struts_action", "/asset_publisher/add_asset_redirect")} 
50        ${redirectURL.setWindowState("pop_up")} 
51 
52        <#assign editPortletURL = entry.getAssetRenderer().getURLEdit(renderRequest, renderResponse)!"" /> 
53 
54        <#if validator.isNotNull(editPortletURL)> 
55            <#assign title = languageUtil.format(locale, "edit-x", entry.getTitle(locale)) /> 
56				    <a class="content-edit-icon-profile" href="${editPortletURL}"><i class="fas fa-edit"></i></a> 
57        </#if> 
58    </#if> 
59									 
60									 <div class="projectBox"> 
61                           <a href="${viewURL}"> 
62                              <div class="projectBoxInner"> 
63                                 <div class="projectImg"> 
64                                    <img style= "border-radius:10px; height:300px;" src="${imageUrl}" alt="img" > 
65                                 </div> 
66                                 <div class="projectTxt"> 
67                                    <h4>${fields[0].getValue().getString(locale)}</h4> 
68                                    <span><@liferay.language key="read_more" /></span> 
69                                 </div> 
70                              </div> 
71													</a> 
72                        </div> 
73                     </div> 
74	</#if> 
75											 
76											</#list> 
77										</#if> 
78										 
79											</div> 
80											</div> 
81							<div class="owlControlGroup w-100 d-flex align-items-center justify-content-center"> 
82                     <div class="owlNavBtn"> 
83                        <div class="btn-wrap owl-nav"> 
84                           <button class="prev-btn owl-prev"><span>‹</span></button> 
85                           <div id="custom-owl-dots3" class="custom-owl-dots owl-dots"></div> 
86                           <button class="next-btn owl-next"><span>›</span></button> 
87                        </div> 
88                     </div> 
89                  </div> 
90								  
91    </section> 
92 
93 <script> 
94        $(document).ready(function() { 
95    // Function to highlight active link based on scroll position 
96    function highlightActiveLink() { 
97      const scrollPosition = $(window).scrollTop(); 
98 
99      $('section').each(function() { 
100        const sectionTop = $(this).offset().top - 50; // Adjust offset if needed 
101        const sectionBottom = sectionTop + $(this).outerHeight(); 
102 
103        if (scrollPosition >= sectionTop && scrollPosition < sectionBottom) { 
104          const targetId = '#' + $(this).attr('id'); 
105          $('.scrollNav a').removeClass('active'); 
106          $('.scrollNav a[href="' + targetId + '"]').addClass('active'); 
107
108      }); 
109
110 
111    // Function for smooth scrolling on link click 
112    $('.scrollNav a').on('click', function(e) { 
113      e.preventDefault(); 
114      const targetId = $(this).attr('href'); 
115      const $targetSection = $(targetId); 
116 
117      if ($targetSection.length) { 
118        $('html, body').animate({ 
119          scrollTop: $targetSection.offset().top 
120        }, 100, 'swing', function() { 
121          highlightActiveLink(); // Highlight active link after scrolling 
122        }); 
123
124    }); 
125 
126    // Highlight active link on initial page load 
127    highlightActiveLink(); 
128 
129    // Highlight active link on scroll 
130    $(window).on('scroll', function() { 
131      highlightActiveLink(); 
132    }); 
133  }); 
134      </script> 
135      
136      <script> 
137          
138         // Get all video containers 
139         var videoContainers = document.querySelectorAll('.video-container'); 
140          
141         // Iterate through each video container 
142         videoContainers.forEach(function (container) { 
143             // Get video and button inside each container 
144             var video = container.querySelector('.video-item'); 
145             var btn = container.querySelector('.video-btn'); 
146          
147             // Function to play/pause video and change button text 
148             function myFunction() { 
149                 if (video.paused) { 
150                     video.play(); 
151                     btn.innerHTML = '<i class="fa fa-pause" aria-hidden="true"></i>'; 
152                 } else { 
153                     video.pause(); 
154                     btn.innerHTML = '<i class="fa fa-play" aria-hidden="true"></i>'; 
155
156
157          
158             // Attach the myFunction to the button's click event 
159             btn.addEventListener('click', myFunction); 
160         }); 
161          
162          
163          
164          
165          
166          
167          
168          
169      </script> 
170 
171      <script> 
172         // Parallax background 
173         $('.jarallax').jarallax({ 
174             speed: 0.5, 
175         }) 
176          
177          
178          
179          
180         $(".youtube-link").grtyoutube({ 
181             autoPlay: true, 
182             theme: "dark", 
183         }); 
184         $(".ourUnitsOwlCarousel").owlCarousel({ 
185             loop: false, 
186             margin: 20, 
187             dots: true, 
188             // autoplay: true, 
189             autoplayTimeout: 5000, 
190             smartSpeed: 1000, 
191             nav: true, 
192             autoplayHoverPause: true, 
193             dotsContainer: '#custom-owl-dots3', 
194             responsive: { 
195                 0: { 
196                     items: 1, 
197                     dots: false, 
198                 }, 
199                 600: { 
200                     items: 3, 
201                     dots: false, 
202                 }, 
203                 768: { 
204                     items: 3, 
205                 }, 
206                 1200: { 
207                     items: 5, 
208                 }, 
209             }, 
210         }); 
211          
212         $(document).ready(function ($) { 
213             var owl = $(".ourUnitsOwlCarousel"); 
214             owl.owlCarousel(); 
215             $(".next-btn").click(function () { 
216                 owl.trigger("next.owl.carousel"); 
217             }); 
218             $(".prev-btn").click(function () { 
219                 owl.trigger("prev.owl.carousel"); 
220             }); 
221             $(".prev-btn").addClass("disabled"); 
222             $(owl).on("translated.owl.carousel", function (event) { 
223                 if ($(".owl-prev").hasClass("disabled")) { 
224                     $(".prev-btn").addClass("disabled"); 
225                 } else { 
226                     $(".prev-btn").removeClass("disabled"); 
227
228                 if ($(".owl-next").hasClass("disabled")) { 
229                     $(".next-btn").addClass("disabled"); 
230                 } else { 
231                     $(".next-btn").removeClass("disabled"); 
232
233             }); 
234         }); 
235      </script> 
236      <script> 
237         const element = document.querySelector(".cpwdTimeline"); 
238         let isDragging = false; 
239         let previousX; 
240         let autoplayInterval; // Variable to store autoplay interval 
241          
242         function handleMove(event) { 
243             if (isDragging) { 
244                 const clientX = event.clientX || event.touches[0].clientX; 
245                 const deltaX = clientX - previousX; 
246                 element.scrollLeft -= deltaX; 
247                 previousX = clientX; 
248
249
250          
251         element.addEventListener('mousedown', (event) => { 
252             isDragging = true; 
253             previousX = event.clientX; 
254         }); 
255          
256         element.addEventListener('touchstart', (event) => { 
257             isDragging = true; 
258             previousX = event.touches[0].clientX; 
259         }); 
260          
261         element.addEventListener('mousemove', handleMove); 
262         element.addEventListener('touchmove', handleMove); 
263          
264         window.addEventListener('mouseup', () => { 
265             isDragging = false; 
266         }); 
267          
268         element.addEventListener('selectstart', () => { 
269             const selection = window.getSelection(); 
270             if (selection.toString().length > 0 && selection.focusNode.parentElement === element) { 
271                 element.scrollLeft = 0; 
272
273         }); 
274          
275         function startAutoplay() { 
276             autoplayInterval = setInterval(() => { 
277                 // Change the scrollLeft value here for smooth autoplay 
278                 element.scrollLeft += 1; // Adjust this value for the desired scrolling speed 
279             }, 20); // Change the interval for smoother/faster scrolling 
280
281          
282         function stopAutoplay() { 
283             clearInterval(autoplayInterval); 
284
285          
286         element.addEventListener('mouseenter', stopAutoplay); // Pause autoplay on hover 
287         element.addEventListener('mouseleave', startAutoplay); // Resume autoplay on mouse leave 
288          
289         // Initial handling of window size on load 
290         function handleResize() { 
291             isDragging = false; 
292
293          
294         window.addEventListener('resize', handleResize); 
295         handleResize(); 
296          
297         $('.counting').each(function () { 
298             var $this = $(this), 
299                 countTo = $this.attr('data-count'); 
300          
301             $({ countNum: $this.text() }).animate({ 
302                 countNum: countTo 
303             }, { 
304                 duration: 3000, 
305                 easing: 'linear', 
306                 step: function () { 
307                     $this.text(Math.floor(this.countNum)); 
308                 }, 
309                 complete: function () { 
310                     $this.text(this.countNum); 
311
312             }); 
313         }); 
314          
315         // Start autoplay initially 
316         startAutoplay(); 
317          
318          
319          
320      </script> 
321      <script> 
322        //  var $sidebar = $('#sidebar-nav'); 
323        //  var $content = $('#content'); 
324        //  var sidebarTop = $sidebar.position().top; 
325          
326        //  $(window).scroll(function () { 
327        //      var windowScrollTop = $(window).scrollTop(); 
328        //      var blogHeight = $content.outerHeight(); 
329          
330        //      if (windowScrollTop >= sidebarTop) { 
331        //          $sidebar.toggleClass('sticky', windowScrollTop < blogHeight); 
332        //      } else { 
333        //          $sidebar.removeClass('sticky'); 
334        //      } 
335        //  }); 
336          
337          
338          
339      </script>